Home Inspection Lancaster, PA

The purpose of this screening-type measurement is to quickly determine if a house contains high concentrations of radon gas. This measurement should provide information for deciding if there is a need for additional measurements or remediation. The standard testing procedures are based on the assumption that the greatest source of radon is the soil underlying the house. If other sources are suspected, additional measurements in different locations in the home may be considered. In the event that your Radon level does indicate that mitigation is needed, we are equipped to help you out with that. We utilize a third-party unaffiliated lab to analyze our tests. See our Radon Services page for more information on Radon.

Are you concerned about the possible impact of wood destroying insects such as termites or powder post beetles? You may want this inspection. This is not covered in a standard whole house inspection because not everyone needs it. If you are purchasing a home, this type of inspection may be required by your lender. Make sure you confirm what is needed with them.

If your property has a well, you may want to test the water for contaminants. We can test for a variety of contaminants, such as bacteria, E.coli, lead, nitrates, total dissolved solids, etc. If you are purchasing a home with a well, your lender may require specific contaminants to be tested. For your convenience, we have sets of testing that are designed to match requirements for conventional or FHA financing, but we always recommend checking with your lender to make sure their requirements are covered. If you live in a home with a well, we recommend having your water tested annually to make sure any filtration or purification systems are still working properly

If you suspect a building has a mold issue, you may want to do an air test for mold spores. This will tell you exactly what kind of mold you are dealing with and can give you clues as to what is causing it, as well as whether remediation is called for.

An inspection to ASHI standards of a single item or system of a house (i.e. plumbing, roof, porches, etc.). See our Inspection page for more info.

Enviroquest is a Certified Passive House Consultant and builder and we are ready to help you save money and energy now by turning your house into a Passive House. A Passive House is an advanced energy-efficient standard which produces superior indoor quality while reducing heating energy use. Any remaining heat demand is provided by an extremely small source. An energy recovery ventilator also provides a constant, balanced fresh air supply. The Passive House system can save up to 90% of space heating costs. Local materials are used in combination with water and energy conservation technologies. On-site generation of renewable energy means a much lower environmental impact than a standard house and lower bills for you. If you are interested in pursuing a Passive House project, contact us for more information.